• Aflux® 16

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    calcium salts of naturally occuring fatty acids in blended with an amide ester wax
    Approx. Melting Range [°C]
    80-105
    Appearance/ Supply Form
    beige granules
    Applications
    Polymer compounds, primarily based on EPDM and IIR. Reduces the viscosity of rubber mixes. Reduces sticking to mixing units, aids removal of vulcanizates from the mold.
  • Aflux® 18

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    Approx. Melting Range [°C]
    Appearance/ Supply Form
    Applications
  • Aflux® 25

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    combination of isoalkanes with fatty acids
    Approx. Melting Range [°C]
    64-76
    Appearance/ Supply Form
    whitish pastilles
    Applications
    Lubricant for NR and speciality rubbers such as ACM, CR, FPM, HNBR, NBR, etc. For molded and extruded goods of all types, articles for food contact applications (compliance with BfR recommendations). Suitable for extrusion and injection molding.
  • Aflux® 37

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    Blend of surface active substances with fatty acids.
    Approx. Melting Range [°C]
    57 - 63°C
    Appearance/ Supply Form
    white pastilles
    Applications
    Silica tire treads, compounds based on highly active white fillers.
  • Aflux® 42

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    blend of fatty acids, fatty alcohols and fatty acid esters
    Approx. Melting Range [°C]
    80-90
    Appearance/ Supply Form
    white, beige to yellow, brown pastilles
    Applications
    For all rubbers including EPDM and CR. For technical molded and injected articles of all types, footwear. For continuous vulcanisation processes (LCM, UHF) and injection molding.
  • Aflux® 42 M

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    blend of fatty acids, fatty alcohols and fatty acid esters
    Approx. Melting Range [°C]
    solidification point: 80-90
    Appearance/ Supply Form
    light-brown to brown pastilles
    Applications
    For all rubbers including EPDM and CR. For technical molded and injected articles of all types, footwear. For continuous vulcanisation processes (LCM, UHF) and injection molding.
  • Aflux® 54

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    pentaerythrityltetrastearate
    Approx. Melting Range [°C]
    58-65
    Appearance/ Supply Form
    whitish micro pearls
    Applications
    Particularly suitable for AU, CO, ECO and FPM, technical molded and extruded articles. Reduces the viscosity of rubber mixes. Reduces sticking to mixer units, aids removal of vulcanizates from the mold.
  • Aktiplast®

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    combination of zinc salts of unsaturated fatty acids
    Approx. Melting Range [°C]
    73-87
    Appearance/ Supply Form
    light brown pastilles
    Applications
    Molded and extruded goods of all types, expanded rubber articles, hard rubber, rubber articles for food contact applications (compliance with BfR recommendations). Peptising effect in NR and IR above 60°C. Retards scorch and accelerates vulcanisation.
  • Aktiplast® PP

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    combination of zinc salts of saturated fatty acids
    Approx. Melting Range [°C]
    101-111
    Appearance/ Supply Form
    light brown pastilles
    Applications
    Tires, molded and extruded articles of all types, hard rubber. Peptising effect in NR and IR upwards of 60°C. Retards scorch and accelerates vulcanisation.
  • Aktiplast® ST

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    blend of hydrocarbons, Zn-soaps and fillers
    Approx. Melting Range [°C]
    85-100
    Appearance/ Supply Form
    light-brown pastilles
    Applications
    Dispersant and lubricant for highly filled synthetic diene rubber compounds; particularly suitable for compounds containing high-activity silica: tire treads, technical molded articles.
  • Aktiplast® T

    Available in
    America, Asia, EMEA, India
    Chemical Composition
    combination of zinc salts of unsaturated fatty acids
    Approx. Melting Range [°C]
    78-96
    Appearance/ Supply Form
    brown pastilles
    Applications
    Molded and extruded goods of all types, expanded rubber articles, hard rubber. Peptising effect in NR and IR above 60°C. Retards scorch and accelerates vulcanisation.